Arial
Wingdings
Monotype Sorts
Symbol
Samsung ML-1250 PCL 6
Copyright (c) JUSTWAY Co., Ltd. 1999
winspool
LPT1:
Dimensions
Horizontal dimension line with variable dimension line & text positions.
itions.
Vis_TMH.chm!#24764 `7Copyright 2000 Visio Corporation. All rights reserved.
`1Choose the displayed precision for the dimension. Precision
`#Choose the units for the dimension. Units Use Drawing Page's Units;.Feet-Inch (1'-0"");.Feet (1.00');.Inches;.Feet (1.00ft);.Miles;-Millimeters;-Centimeters;-Meters;-Kilometers
`4Choose whether or not to display unit abbreviations. Units Display Don't Show Units;Show Units
Both `)Choose which extension lines are visible. Extension Lines ` Both;End only;Begin only;Neither
`8Choose the angle at which the dimension line is rotated.
Precision && Units... `?Choose unit and precision settings for the displayed dimension. Prop.LPrec.Invisible
Set As Page Default `HSet this shape's precision and unit options as the default for the page. ThePage!User.LPrec Prop.LPrec User.LPrecVal ThePage!User.LUnits Prop.LUnits User.LUnitsVal ThePage!User.ShowUnits Prop.ShowUnits User.ShowUnitsVal
Revert To Page Default `SSet this shape so that it uses the default precision and unit settings of the page. Prop.LPrec User.LPrecVal Prop.LUnits User.LUnitsVal Prop.ShowUnits User.ShowUnitsVal
_Reset Text Position `-Move dimension text to it's default location. Controls.X2 Scratch.X1 Controls.Y2 Height
Extension Lines... `)Choose which extension lines are visible. Prop.LPrec.Invisible
Change Dimension Height
Reposition Text
Use Drawing Page's Units;.Feet-Inch (1'-0");.Feet (1.00');.Inches;.Feet (1.00ft);.Miles;-Millimeters;-Centimeters;-Meters;-Kilometers
0.00
Use Drawing Page's Units
Don't Show Units
1.00
esc(0)
`.0;0FT 0IN;0.0FT;0IN;0FT;0MI;0 MM;0 CM;0 M;0 KM
`"Linear Precision Formatting String
`#0=Dwg, 1=Arch, 2=Dec Ft, 3+ = other
Aligned dimension with equal length extensions and variable dimension line & text positions.
sitions.
& text positions.
Vis_TMH.chm!#24770 `7Copyright 2000 Visio Corporation. All rights reserved.
Vertical dimension line with variable dimension line height & text positions.
Vis_TMH.chm!#24767 `7Copyright 2000 Visio Corporation. All rights reserved.
Q(-DT `8Choose the angle at which the dimension line is rotated. Q(-DT
Variable dimension angle, extension line cut-off, dimension line location, & text position.
ition.
Vis_TMH.chm!#24779 `7Copyright 2000 Visio Corporation. All rights reserved.
0;0DEG;0DEG;0DEG0MIN0SEC;0RAD
`#Angular Precision Formatting String
`$0=Dwg, 1=°, 2=deg, 3=° ' "", 4 = rad
Change Dimension Angle
Resize Dimension
Change Extension Line Length
Precision && Units... `?Choose unit and precision settings for the displayed dimension. Prop.APrec.Invisible
Set As Page Default `HSet this shape's precision and unit options as the default for the page. ThePage!User.APrec Prop.APrec User.APrecVal ThePage!User.AUnits Prop.AUnits User.AUnitsVal
Revert To Page Default `SSet this shape so that it uses the default precision and unit settings of the page. Prop.APrec User.APrecVal Prop.AUnits User.AUnitsVal
_Reset Text Position `-Move dimension text to it's default location. Controls.X2 Connections.X1 Controls.Y2 Connections.Y1
Extension Lines... `)Choose which extension lines are visible. Prop.APrec.Invisible
`#Choose the units for the dimension. Units `[Use Drawing Page's Units;Degrees (10.5°);Degrees (10.5deg);Deg-Min-Sec (10°15°20"");Radians
Both `)Choose which extension lines are visible. Extension Lines `2Both;1st extension only;2nd extension only;Neither
esc(2)
0=Dwg, 1=°, 2=deg, 3=° ' ", 4 = rad
0.0\°
90.0°
0.0
Use Drawing Page's Units;Degrees (10.5°);Degrees (10.5deg);Deg-Min-Sec (10°15°20");Radians
Degrees (10.5°)
0DEG
Place 1-D endpoints on baseline & 1st feature, up to 4 horizontal baseline dimensions.
to 4 horizontal baseline dimensions.
TUUUUU
Vis_TMH.chm!#24762 `7Copyright 2000 Visio Corporation. All rights reserved.
Reposition 2nd Dimension Line
Reposition 3rd Dimension Line
Reposition 4th Dimension Line
Change Line Spacing
0.50
`7Copyright 2000 Visio Corporation. All rights reserved.
10.00
110.00
0 MM
-Millimeters
6.00
11.40
7.00
109.38
26.50
13.25
104.47
76.47
114.00
57.00
132.50
66.25
Guide
TheDoc
Page-1
Gesture Format
Page-2
Dimension
Horizontal
LPrec
LUnits
ShowUnits
Extensions
Angle
AntiScale
LUnitsFactor
FormatString
LengthText
Length
LPFString
LPrecInd
LPrecVal
LUnitsInd
LUnitsVal
ShowUnitsInd
ShowUnitsVal
FeetInch
Feet
Inch
InchPrec
LocEndX
LocEndY
visObjectType
DrawingUnitFactor
Aligned even
Vertical
Angle even
APrec
AUnits
AUnitsFactor
AngleText
APFString
APrecInd
APrecVal
AUnitsInd
AUnitsVal
Horizontal baseline
Length2
Length3
Length4
LengthText2
LengthText3
LengthText4
FeetInch2
FeetInch3
FeetInch4
Feet2
Feet3
Feet4
Inch2
Inch3
Inch4
TextAng